A little hull layup…

Upgraded the video on this a bit: The layup on a 68′ cylinder molded hull currently under construction in Roatan: it’s speeded up quite a bit, this is about 25 minutes of real time. the half hull panels are approximately 11′ x 71′ – 4 layers of 3mm plywood and 33 gallons of epoxy.

[flashvideo file=”http://multihullblog.com/wp-content/uploads/flash-hull.flv” /]

4 thoughts on “A little hull layup…”

Leave a Reply to toni Cancel reply

Your email address will not be published. Required fields are marked *