Am doing this very simple 40’+ dive catamaran. Mostly flat panel construction, except the bilge. Probably no core on hulls, with stringers instead. As simple and cost effective as possible. And an exploded view of the flat panels.
Am doing this very simple 40’+ dive catamaran. Mostly flat panel construction, except the bilge. Probably no core on hulls, with stringers instead. As simple and cost effective as possible. And an exploded view of the flat panels.
This method looks like it would work well for a design like the 37′ or the 40′ bridgedeck cat to speed up the process and reduce the amount of fairing. Is there a plan/ detail to reduce fairing at the joints like a “drywall” taper?
Kurt, are the bilges CM, strip cedar, strip foam, or all of the above?
Cruiser version coming soon?
bilges probably solid laminate with glass stringers. topsides with core.
A good ramp or plank for loading and unloading the air is a must. My opinion is that the cabin has to be larger with an option for a roof deck with lifelines and a short utility mast. Most likely the posting is about the amas and I’m blabing my mouth for nothing.